Lessons Learned from Years with Services

Posted on Posted in Home Products & Services

All You Need to Know About Water Heater Repair

The thermodynamic process utilizing energy source for heating water above the initial temperature is termed as water heating. Some of the domestic uses of hot water include bathing, cooking, cleaning and space heating. Typical household uses kettles, water heaters, pot, cauldrons or coppers, but these types of water vessels don’t produce a steady supply of hot water in a preset temperature. Water heaters or hot water heaters are the appliances providing a steady supply of hot water. Water repair situations affect electric water heaters that involve an understanding of their mechanisms and requiring purchasing of inexpensive parts. In this article, we will share some troubleshooting tips for any water heater problem.

The common issues among water heaters that many of us experience include black or rusty, colored water, foul odor, noisy heating elements, no water, water is not hot enough, takes too long to reheat, water that’s too hot, and leaking pressure relief valve. Check the circuit breaker that’s should be a two pole breaker in your circuit breaker panel for water heater that don’t have hot water. You need to also check the thermostat, element or limit switch as well as loose water heater wiring. If the water heater don’t have enough hot water coming out, it is important to check the thermostat, the heating elements, loose wiring and dip tube. If it takes too long to reheat the water, you can make some simple adjustments in the thermostat, a possible issue with the lower element or sediment build up in the bottom part of the tank. Check the thermostat that may be set too high for water that’s too hot, so it is best to locate the thermostat and change it to its appropriate settings. A water heater that brings out too hot water may be caused by malfunctioning of thermostat or improperly sealed thermostat.

Noisy heating elements may be a result of having the wrong water heater elements or build up of scale on the elements, requiring cleaning or replacement. Black or rusty colored water is a result of dissolved anode or scale build up of elements that means the tank starts to rust, so it is better to clean or replace the elements. Flushing of the tank helps in preventing bacteria build up that causes foul odor coming out from water heater, as well as replacement of the anode rod with a different metal. For leaking pressure relief valve, it may be caused by something getting into it or valves that won’t seat properly, so the best solution is to have the valve replaced. If you’re too busy to undergo a water heater repair, you may contact us to help you out.

Partner post: http://tipsfromtia.com/